The EME195 Series RX bias tee Kits are suitable for powering receive only Pre-amplifiers via a coaxial cable, and are available in 3 frequency ranges that cover 0.5MHz to 2GHz. All Kits have been optimized to cover a wide frequency range for the lowest loss and return loss. The board is fitted with PTC protection to safeguard against any short circuits on the RF/DC output. For wide band use with scanning receivers, select the V ( 30 to 500MHz ) version. For the Mini-Kits HF Active whip or Loop Amplifiers use the H ( 0.5 to 100MHz ) version.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in a few days.
EME195 KIT1 is a Basic Kit that includes the PC board, instructions and on board components, No SMA connectors. Requires complete construction, and soldering of some SMD components.
EME195 KIT2 Is the Basic KIT1 which also includes a Hammond 1590H enclosure, 2x SMA female, 2.1mm DC Socket, and a 2.1mm DC power cable. Requires complete construction, and soldering of some SMD components.
EME195B-M Is a fully built and tested module board Kit with female SMA connectors.
EME195B-ENC Is a fully built and tested product in a Hammond 1590H enclosure with female SMA connectors, 2.1mm DC socket and a 2.1mm DC power cable
Frequency Options are V for 30MHz to 500MHz or U for 300MHz to 2GHz
|Frequency Range: ||30MHz to 2GHz ( 2x Kit Versions )|
|Insertion Loss: ||Typically <0.5dB |
|Return Loss: ||Typically > 20dB |
|Operating Voltage:||+12vdc ( +25vdc @ 160mA maximum )|
|Board Size:||30mm L x 22.5mm W x 10mm H ( Does not include Connectors ) |
For more information see the EME195 KIT WEBPAGE
Bias Tee for Receive Only Amplifiers
- Brand: Mini-Kits
- Product Code: EME195 KIT
- Quantity In Stock: 40
- Export: $13.18
- 10 pcs or more $13.05
- 20 pcs or more $12.32