The PGA-103-2M-R2 is a high dynamic range low noise receive only wide-band amplifier that is specifically designed for use between 144MHz and 148MHz. The amplifier is also suitable as a driver amplifier for complex RF waveforms, and produces up to +21dBm output on 150MHz. The amplifier can be supplied for use between 120 and 160MHz @ 4MHz BW at extra cost. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the PGA-103+ Data Sheet for further information.
This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load and quantity ordered, but are normally shipped in a few days.
PGA103-2M-R2-B Is a fully constructed and tested 144-148MHz PC board Amplifier with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
PGA103-2M-R2-ENC Is a fully constructed 144-148MHz amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
Frequency Option: The standard product is tuned for a 4MHz BW of 144-148MHz. The Custom Tuned option is an extra cost, and can be supplied with a 4MHz BW between 120 and 160MHz.
|144MHz to 148MHz ( Non Tune-able )
|40dB @ 50MHz >60dB @ 430MHz
|22dB +/-1dB @ 147MHz
|1dB @ 144MHz, ( Typically <0.7dB )
|+39dBm @ 145MHz, with ICC 90mA
| +21dBm @ 145MHz ( +4.5vdc @ 90mA )
|+ 7 to 15vdc ( +12vdc @ 90mA Recommended )
|37mm L x 41mm W x 15mm H ( Does not inc SMA length )
|43mm L x 44mm W x 23.3mm H ( Does not inc SMA length )
For more information see the PGA103-2M-R2 Product WEBPAGE
PGA-103-2M Low Noise RX Amplifier 144-148MHz
- Brand: Mini-Kits
- Product Code: PGA103-2M-R2
- Quantity In Stock: 2
- Export: $62.27