The PGA-103-915M-R2 is a high dynamic range low noise receive only wide-band amplifier that is specifically designed for use between 902 and 928MHz. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the PGA-103+ Data Sheet for further information.
This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in a few days.
PGA103-915M-R2-B Is a fully constructed and tested 915MHz PC board Amplifier with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
PGA103-915M-R2-ENC Is a fully constructed 915MHz amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
|Frequency Range:||CF 915MHz ( BW 26MHz @ 3dB ) 902 to 928MHz |
|Band Rejection:||>40dB @ 850MHz >40dB @ 1000MHz|
|Gain Typically:||16dB +/-1dB @ 915MHz |
|Noise Figure: ||1dB @ 915MHz, ( Typically <0.7dB )|
|Operating Voltage:||+ 7 to 15vdc ( +12vdc @ 90mA Recommended )|
|Board Size:||37mm L x 41mm W x 15mm H ( Does not inc SMA length ) |
|Enclosure Size:||43mm L x 44mm W x 23.3mm H ( Does not inc SMA length ) |
For more information see the PGA103-915M-R2 Product WEBPAGE
PGA-103-915M Low Noise RX Amplifier 902-928MHz
- Brand: Mini-Kits
- Product Code: PGA103-915M-R2
- Quantity In stock: 2