The Mini-Kits EME232 HF Active Vertical Whip Antenna Module has been designed to be easy to install, and covers a wide frequency range from 100kHz to 80MHz. It is particularly useful for those that have antenna restrictions or limited space to install a full size antenna, and can be used in antenna arrays for noise cancellation or beam forming. The design incorporates static and lightning protection, and has a broadband 50ohm output impedance suitable for driving most receivers. A J310 FET is used as the active device, and along with a complementary push pull output buffer produces high output second and third order figures reducing the possibility of inter modulation on the received signals. The design incorporates power supply decoupling so that power can be fed to the Active circuit via the coaxial cable. Download the HF Active Product Brochure
Please refer to the Options TAB above on what is included with all options. It is recommended that the EME195 HF Bias Tee or EME215 HF RX Active Switch Kit is used to feed the power supply voltage up the coaxial cable to power the active antenna. For more detailed information on how this module Kit can be used Please see the EME232 Kit webpage.The Product image shows a fully constructed EME232B-M Module product. Please refer to the Options Tab for the descriptions of the various products available.
EME182-KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. Requires complete construction, does not include an Enclosure, Whip Antenna or coaxial cable.EME232B-M is a fully constructed and aligned Module in a GME Masthead enclosure. Requires a Whip Antenna and coaxial cable.
Aerpro AP122 126cm Antenna. These are ideal for using as the whip Antenna and more information can be seen on the HF Active Antenna web page.
RG6 Quad Coax Cable Assy ( Please select ( FP01 ) F Male 75 ohm one end and BNC Male and length required )
Bias Tee for Receiver Only Amplifier ( Select H ( 0.5 to 100MHz ) Version ( Please select one connector as F Type Female FP09 and other )
||100kHz to 80MHz @ 3dB
|Gain:||-7dB loss 100kHz to 80MHz
|O/P Excess Noise:
|Output Return Loss:
||> 25dB from 500kHz to 60MHz
|Operating Voltage:||+13 to 15vdc @ 60mA ( +13.8vdc Recommended )|
|Board Size:||83mm L x 65mm W x 20mm H|
For more information see the EME232 KIT WEBPAGE
HF Active Whip Antenna Module 100kHz to 80MHz
- Brand: Mini-Kits
- Product Code: EME232-KIT
- Quantity In stock: 10