The Mini-Kits EME220-2M is a High Performance RX/TX masthead Pre-amplifier mounted in a Hammond 1590S enclosure, and is specifically designed for the 2m 144-148MHz Amateur Band. The design uses the Mini-Circuits PGA-103 E-PHEMT amplifier that has a very high dynamic range and ultra low noise figure, and provides superior performance to Mos or GaAs FETs. The gain is adjustable so that the gain distribution can be optimized for coaxial cable loss that can be significant on the 2m band, and also to suit the receiver gain.  The design incorporates VOX RF sensed changeover Relays for Trasnsceivers up to 100 Watts CW without using sequencing, or can handle up to 500 Watts PEP if sequencing is used.  An on board bias tee ( DC power injector ), allows the pre-amplifier to be antenna mounted and powered via the coaxial cable. A Tuned input T type filter and low pass filter provides high rejection of signals at 50 and 430MHz.

The Product picture shows a completed EME220-2M-1590S product with BNC connectors.

N type female connectors are available as an option.

Refer to the application block diagram and the EME220 product Webpage for more information.

EME220-2M-1590S Is a fully constructed product in a Hammond 1590S enclosure with BNC or N Type female connectors.  Please see the specifications TAB for more information.

Connector Options ( Preamps ) There is the option for either BNC or N type Female connectors.

Specifications
Frequency Range:
144 to 148MHz ( BW 10MHz @ 1dB )
Band Rejection:Typically >40dB @ 50MHz, 60dB @ 430MHz
Gain Adjustable:Typically +18dB Max, 10dB Min @ 145MHz Adjustable
Noise Figure:
0.8dB ( Typically <0.7dB @ 145MHz )
Through Loss:
0.05dB @ 145MHz Bypass Mode
RF Power Handling:
100W CW ( Un-Sequenced ) 500W PEP ( Sequenced )
Minimum RF Input:
+20dBm ( 100 mW ) To activate the RF sensing circuit
Operating Voltage:+11 to 15vdc ( +12vdc @ 150mA Recommended )
RF Connectors:BNC or N Female ( Not available in other types )
Enclosure Size:110mm L x 80mm W x 45mm H
Kit Webpage:For actual product Tests see the EME220 Kit Webpage

This Product is available to ship to Australia and New Zealand Only and is Not available for Export to other countries.

Please Note: Built products need to be constructed and can take up to 10 working days before being shipped.

For more information please see the EME220 Product Webpage

2m 144-148MHz VHF RX/TX Preamplifier Diecast Enclosure

  • Brand: Mini-Kits
  • Product Code: EME220-2M-1590S
  • Quantity In Stock: 1
  • $267.95

  • Export: $243.59

Available Options


Related Products

2m 144-148MHz Receive Only Preamplifier

2m 144-148MHz Receive Only Preamplifier

Priced from

$24.95 Export: $22.68

CNT®-240 Design Your Own Coaxial Cable Assy

CNT®-240 Design Your Own Coaxial Cable Assy

Priced from

$0.00 Export: $0.00

2m 144-148MHz VHF RX/TX Preamplifier Kit

2m 144-148MHz VHF RX/TX Preamplifier Kit

Priced from

$65.95 Export: $59.95

2M / 1.25M / 70CM RX/TX Bias Tee

2M / 1.25M / 70CM RX/TX Bias Tee

Priced from

$55.95 Export: $50.86

2m VHF Antenna Polarization Switch

2m VHF Antenna Polarization Switch

Priced from

$51.95 Export: $47.23