The 10GHz frequency multiplier is constructed on a EME200 Universal Microwave board, and has been specifically designed as a local oscillator multiplier for 10GHz Transverters, RX converters, or as a multiplier for ATV. A pipe-cap cavity filter is used to effectively filter out harmonics and oscillator noise allowing Transverter I/F frequencies down to 144MHz to be used. Please refer to the Application Block Diagram on how this product is used. The pipe-cap supplied allows the multiplier it to be used on frequencies from approximately 8 to 12GHz.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
EME10G-MLT-R3 KIT Multiplier Kit is the Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.Use the EME5.8G-MLT KIT with the EME10G-MLT KIT for a complete 10GHz multiplier solution.
Kits Do Not include connectors, miscellaneous hardware, or an enclosure. A Metric M4 Tap and 0.9mm drill bit is required to construct this Kit. For advanced constructors Only.
|Input Frequency: ||4000 to 6000MHz ( 2x ) 3000 to 4000MHz ( 3x ) |
|Output Frequency: ||8000 to 120000MHz ( Tunable 1/2" pipe cap filter ) |
|Filter Bandwidth 9936MHz: ||90MHz @ 3dB|
|RF Input: ||-3 to +7dBm ( 0dBm recommended)|
|RF Output: ||depends on input frequency & drive level, typically +8dBm output @ 9936MHz|
|Operating Voltage:||+10 to 15vdc 78M09 regulator ( +12vdc @ 90mA Recommended )|
|Board Size:||64mm L x 38mm W x 40mm H|
EME10G KIT WEBPAGE ( Sorry there is no page currently available )
Please refer to the Application Block Diagram on how this Kit is used.
10GHz Frequency Multiplier
- Brand: Mini-Kits
- Product Code: EME10G-MLT-R3 KIT
- Quantity In Stock: 3
- Export: $33.59