The 5800MHz frequency multiplier has been specifically designed as a local oscillator multiplier for 5760MHz Transverters, RX converters, or as a multiplier for ATV. A pipe-cap cavity filter is used to effectively filter out harmonics and oscillator noise allowing Transverter I/F frequencies down to 144MHz to be used. The 3/4" pipe-cap supplied has a tune-able frequency range of approximately 3.7 to 6GHz. Please refer to the Application Block Diagram on how this Kit is used.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
EME5.8G-MLT KIT Multiplier Kit is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.
EME5.8G-MLT PCB Includes Only the PC board and Kit instructions. No on board Components are included.
For use with a Transverter, it is highly recommended that both the EME5.8G-MLT KIT and EME5.8G-AMP KIT1 are purchased to provide the required filtering of the Local Oscillator signal. For basic receive only, you could use the EME5.8G-MLT KIT1 followed by a Gali-39 Amplifier.Kits Do Not include connectors, miscellaneous hardware, or an enclosure. A Metric M4 Tap and 0.9mm drill bit is required to construct this Kit. For advanced constructors Only.
||410 to 670MHz ( 9x ) 370 to 600MHz ( 10x )
||3700 to 6000MHz ( Tunable 3/4" pipe cap filter )
|Filter Bandwidth 5616MHz:
||70MHz @ 3dB See Kit Webpage for detailed tests|
||-3 to +7dBm ( 0dBm recommended)|
||depends on input frequency & drive level, typically +10dBm output @ 5616MHz
|Operating Voltage:||+10 to 15vdc 78M09 regulator ( +12vdc @ 70mA Recommended )|
|Board Size:||64mm L x 38mm W x 40mm H|
5800MHz Frequency Multiplier
- Brand: Mini-Kits
- Product Code: EME5.8G-MLT KIT1
- Quantity In stock: 4