The Mini-Kits EME205 9MHz BFO Demodulator Kit is part of a building block to construct a high performance M1 Series HF Transceiver. The module board is designed as a 9MHz I/F SSB and CW demodulator, and uses a SA612 Gilbert Cell Mixer to demodulate the 9MHz I/F down to a filtered audio output. The module includes an on board Beat Frequency Oscillator BFO, that uses switched multiturn trimpots to set the carrier frequencies for CW, LSB and USB. The BFO is also available as an output on the board for connetion to to the M1 Series EME208 SSB modulator which uses the MC1496. The module has been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but is also ideal to construct you own Receiver or Transceiver design.
For more detailed information on how this module Kit can be used, Please refer to the EME205 Kit webpage.
This Kit is ideal for all constructors mainly due to the use of conventional leaded components. Only a very small number of surface mount components have been used due to component availability. The basic Kit includes the PC board and all onboard components, but excludes the SMA connectors which can be purchased separately if required.
For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.
EME205 KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. Requires complete construction, and some SMD components fitted.
2 x SMA33 connectors are recommended to use with inter wiring of the module board Kits.
1 x IDC16S connector is recommended to use with inter wiring of the module board Kits.
PC boards are not available separately as this Kit uses a number of specialized components that are not easily obtainable
Kits Do Not include miscellaneous hardware, enclosure, or RF connectors.
|Input Frequency: ||9MHz input 50ohms |
|Conversion Gain: ||18dB +/-0.5dB ( SA612 Data Sheet ) |
|Noise Figure: ||5dB @ 45MHz ( SA612 Data Sheet )|
|Input IP3: ||-12dBm ( SA612 Data Sheet ) |
|Audio Output: ||400mW p-p @ 1kHz |
|BFO Output: ||-2dBm output maximum @ +12vdc |
|Operating Voltage:||+10 to 15vdc ( +12vdc @ 15mA )|
|Board Size:||73mm L x 47mm W x 20mm H|
M1 Series 9MHz BFO Demodulator
- Brand: Mini-Kits
- Product Code: EME205-KIT
- Quantity In Stock: 30
- Export: $29.05