The Mini-Kits EME202 HF Mixer-Amplifier is part of a building block to construct a high performance M1 Series HF Transceiver. The module uses a Mini-Circuits ADE-1 +7dBm mixer option and uses a high IP3 20dB Post Mixer Amplifier that can be used for various Radio projects. The mixer has a 500kHz to 500MHz frequency range, but this is limited by the frequency response of the post mixer amplifier to around 60MHz.  The design incorporates PIN diode switching to allow the post mixers amplifier output to be used in both the receiver and transmitter circuits.   A common 16 PIn IDC connector is used for power and the various functions to control the on board PIN diode switching.  The mixer amplifier has been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but is also ideal to construct you own Receiver or Transceiver design.

For more detailed information on how this module Kit can be used, Please refer to the EME202 Kit webpage.

The Product image shows a fully constructed Kit product.  Please refer to the Options Tab for the descriptions of the various products available.

For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.

EME202-CV7 KIT is the Standard +7dBm ADE-1 Mixer Kit that includes the PC board, Instructions, and on board components. Requires complete construction, and soldering of a few SMD components.

EME202-CV17 KIT is the Higher Performance +17dBm ADE-1H Mixer Kit that includes the PC board, Instructions, and on board components. Requires complete construction, and soldering of a few SMD components.

5 x SMA33 connectors are recommended to use with inter wiring of the module board Kits.

1 x IDC16S connector is recommended to use with inter wiring of the module board Kits.

Kits Do Not include miscellaneous hardware, enclosure, or connectors.  The EME202-CV17 Kit requires a +17dBm local oscillator

Specifications: EME202-Rev2
Bandwidth: 500kHz to 60MHz @ 1dB ( ADE-1 / 1H )
Conversion Gain:
15dB +/- 0.5dB 14MHz input / 9MHz Output
Noise Figure:
9.6dB @ 12MHz
Output 1dB Compression:
+14.5dBm @ 14MHz O/P, ( I/P 9MHz 0dBm, L/O 23MHz )
Input IP3:
+14.8dBm @ 14MHz I/P, ( O/P 9MHz, L/O 23MHz )
Output IP3:
+33.4dBm @ 14MHz, ( I/P 9MHz, L/O 23MHz )
Operating Voltage: +10 to 15vdc ( +12vdc @ 80mA )
Board Size: 73mm L x 42mm W x 20mm H

For more information see the EME202 KIT WEBPAGE

M1 Series HF Mixer Amplifier

  • Brand: Mini-Kits
  • Product Code: EME202-KIT
  • Quantity In Stock: 4
  • $39.95

  • Export: $36.32

Available Options

Accessories

Enter desired quantity before clicking Add to Cart button

SMA33 PCB Mount Wide 1.6mm

SMA33 PCB Mount Wide 1.6mm

$3.95 Export: $3.59

IDC16S 8x2 DIL 2.54mm

IDC16S 8x2 DIL 2.54mm

$0.66 Export: $0.60

  • Total:

  • Export Total:

Related Products

M1 Series 10dB HF Amplifier

M1 Series 10dB HF Amplifier

Priced from

$29.95 Export: $27.23

M1 Series 9MHz Crystal Filter

M1 Series 9MHz Crystal Filter

Priced from

$44.50 Export: $40.45

M1 Series 9MHz BFO Demodulator

M1 Series 9MHz BFO Demodulator

Priced from

$49.95 Export: $45.41

M1 Series Preselector Bandpass Filters

M1 Series Preselector Bandpass Filters

Priced from

$39.95 Export: $36.32

M1 Series 500mW Audio Amplifier

M1 Series 500mW Audio Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz IF AGC Amplifer

M1 Series 9MHz IF AGC Amplifer

Priced from

$74.90 Export: $68.09

M1 Series Transmit Modulator

M1 Series Transmit Modulator

Priced from

$47.50 Export: $43.18

M1 Series 16W HF MosFET Amplifier Rev3

M1 Series 16W HF MosFET Amplifier Rev3

Priced from

$69.95 Export: $63.59

M1 Series Low Pass Filters

M1 Series Low Pass Filters

Priced from

$43.95 Export: $39.95

M1 Series HF Attenuator 9MHz Trap

M1 Series HF Attenuator 9MHz Trap

Priced from

$37.95 Export: $34.50

M1 Series 9MHz IF Noise Blanker

M1 Series 9MHz IF Noise Blanker

Priced from

$55.00 Export: $50.00