The Mini-Kits EME207 Preselector Filters are part of a building block to construct a high performance M1 Series HF Transceiver.  The module boards are 3 pole mesh capacitor coupled Chebyshev Band pass filters that are modified PA3AKE designs for the HF Ham bands.  The filters are ideal for use with most receiver or transceiver projects that require narrow filters specifically for the Ham bands for good performance.  The design incorporates onboard relays to switch the filters into the RF signal path, and to provide filter isolation by grounding the filter when switched out of circuit.  The modules use stackable headers so that multiple filter boards can be stacked and controlled through the same IDC interface connector for band switching.

For more detailed information on how this module Kit can be used, Please refer to the EME207 Kit webpage

This Kit is ideal for all constructors mainly due to the use of conventional leaded components.  Only a very small number of surface mount components have been used due to component availability.The basic Kit includes the PC board and all onboard components, but excludes the SMA connectors which can be purchased separately if required.

For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.

EME207-KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. RF Connectors are Not included. Requires complete construction, and soldering of some SMD components.

EME207-PCB is the bare PC Board only and does not include any documentation or components.  ( Not Recommended as the components are not readily available )

2 x SMA33 connectors are recommended to use with inter wiring of the module board Kits.

1 x IDC16S connector is recommended to use with inter wiring of the module board Kits.

4 x SPA-M3x12 used to stack filter boards and match the height of the stackable headers.

Kits Do Not include miscellaneous hardware, enclosure, or connectors.

For more information see the EME207 KIT WEBPAGE

M1 Series Preselector Bandpass Filters

  • Brand: Mini-Kits
  • Product Code: EME207-KIT
  • Quantity In Stock: 70
  • $39.95

  • Export: $36.32

Available Options

EME207-Options Stock Price Qty
BPF3-BC KIT ( MW Broadcast Band Kit ) 4 $39.95
BPF3-160M KIT ( 160 Metre Band Kit ) 4 $39.95
BPF3-80M KIT ( 80 Metre Band Kit ) 4 $39.95
BPF3-40M KIT ( 40 Metre Band Kit ) 4 $39.95
BPF3-20M KIT ( 20 Metre Band Kit ) 4 $39.95
BPF3-17-15M KIT ( 17/15 Metre Band Kit ) 4 $39.95
BPF3-12-10M KIT ( 12/10 Metre Band Kit ) 4 $39.95
BPF3-6M KIT ( 6 Metre Band Kit ) 4 $39.95
EME207-PCB ( Bare PCB Only ) 4 $20.00

Accessories

Enter desired quantity before clicking Add to Cart button

SMA33 PCB Mount Wide 1.6mm

SMA33 PCB Mount Wide 1.6mm

$3.95 Export: $3.59

IDC16S 8x2 DIL 2.54mm

IDC16S 8x2 DIL 2.54mm

$0.66 Export: $0.60

  • Total:

  • Export Total:

Related Products

M1 Series 10dB HF Amplifier

M1 Series 10dB HF Amplifier

Priced from

$29.95 Export: $27.23

M1 Series HF Mixer Amplifier

M1 Series HF Mixer Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz IF AGC Amplifer

M1 Series 9MHz IF AGC Amplifer

Priced from

$74.90 Export: $68.09

M1 Series Transmit Modulator

M1 Series Transmit Modulator

Priced from

$47.50 Export: $43.18

M1 Series 16W HF MosFET Amplifier Rev3

M1 Series 16W HF MosFET Amplifier Rev3

Priced from

$69.95 Export: $63.59

M1 Series HF Attenuator 9MHz Trap

M1 Series HF Attenuator 9MHz Trap

Priced from

$37.95 Export: $34.50

M1 Series 9MHz IF Noise Blanker

M1 Series 9MHz IF Noise Blanker

Priced from

$55.00 Export: $50.00