The Mini-Kits EME202 HF Mixer-Amplifier is part of a building block to construct a high performance M1 Series HF Transceiver. The module is available with either a ADE-1 +7dBm or ADE-1H +17dBm Mini-Circuits mixer option and uses a high IP3 20dB Post Mixer Amplifier that can be used for various Radio projects. The mixer has a 500kHz to 500MHz frequency range, but this is limited by the frequency response of the post mixer amplifier to around 60MHz. The design incorporates PIN diode switching to allow the post mixers amplifier output to be used in both the receiver and transmitter circuits. A common 16 PIn IDC connector is used for power and the various functions to control the on board PIN diode switching. The mixer amplifier has been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but is also ideal to construct you own Receiver or Transceiver design.
For more detailed information on how this module Kit can be used, Please refer to the EME202 Kit webpage.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.
EME202-CV7 KIT is the Standard +7dBm ADE-1 Mixer Kit that includes the PC board, Instructions, and on board components. Requires complete construction, and soldering of a few SMD components.
EME202-CV17 KIT is the Higher Performance +17dBm ADE-1H Mixer Kit that includes the PC board, Instructions, and on board components. Requires complete construction, and soldering of a few SMD components.
5 x SMA33 connectors are recommended to use with inter wiring of the module board Kits.
1 x IDC16S connector is recommended to use with inter wiring of the module board Kits.
Kits Do Not include miscellaneous hardware, enclosure, or connectors. The EME202-CV17 Kit requires a +17dBm local oscillator
|Specifications: EME202-Rev2 |
|Bandwidth:||500kHz to 60MHz @ 1dB ( ADE-1 / 1H ) |
|Conversion Gain: ||15dB +/- 0.5dB 14MHz input / 9MHz Output |
|Noise Figure: ||9.6dB @ 12MHz |
|Output 1dB Compression: ||+14.5dBm @ 14MHz O/P, ( I/P 9MHz 0dBm, L/O 23MHz ) |
|Input IP3: ||+14.8dBm @ 14MHz I/P, ( O/P 9MHz, L/O 23MHz ) |
|Output IP3: ||+33.4dBm @ 14MHz, ( I/P 9MHz, L/O 23MHz )|
|Operating Voltage:||+10 to 15vdc ( +12vdc @ 80mA )|
|Board Size:||73mm L x 42mm W x 20mm H|
For more information see the EME202 KIT WEBPAGE
M1 Series HF Mixer Amplifier
- Brand: Mini-Kits
- Product Code: EME202-KIT
- Quantity In stock: 30