The EME168 Series 70CM / 23CM Band RX/TX bias tee Kit is suitable for powering either the Mini-Kits 70CM band EME237-70CM or 23CM Band EME221-23CM Pre-amplifiers via the coaxial cable. The design has been optimized to cover the complete 400MHz to 1500MHz frequency range for the lowest loss and return loss. The board is fitted with PTC protection to safeguard against any short circuits on the RF/DC output, and over voltage.  Transceivers with an accessory connector usually have a positive voltage, or grounded logic TX output that can be easily connected to the Bias Tee to control the switching. The Bias Tee is designed to handle up to 500 Watts PEP.  EME221-23CM Application Block Diagram

Please select the connector types that you require for both the RF connection to the receiver, and the RF/DC connection that goes to the amplifier.

The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in few days.

EME168-2-70-KIT is the complete VHF Kit that includes the PC board, instructions, all on board components, and Hammond 1590A enclosure. Requires complete construction, and soldering of some SMD components.

EME168-2-70-B Is a fully built and tested product in a Hammond 1590A enclosure.

RF Connector Option ( To Preamplifier ) is the RF connector that connects via a coaxial cable to the Pre-amplifier. This option must be selected and is not optional.

RF Connector Option ( To Transceiver ) is the connector connects via a coaxial cable to the Transceiver.  This option must be selected and is not optional.

The RF and RF/DC connectors must be selected when ordering either the Kit or built product, and are available in BNC, N, and F types.

Kits and built products also include a 2.1mm DC Power Cable
Frequency Range:
400 to 1500MHz ( 70CM and 23CM bands )
Insertion Loss:
<0.3dB from 100 to 1500MHz
Return Loss:
>25dB from 400 to 1500MHz
RF Power:
500 Watts PEP
Operating Voltage: +12 to 15vdc ( +15vdc @ 300mA maximum )
Product Size: 92mm L x 38mm W x 50mm H

For more information see the EME168 KIT WEBPAGE

Please refer to the EME221-23CM Application Block Diagram on how this Product is used .

70CM / 23CM RX/TX Bias Tee

  • Brand: Mini-Kits
  • Product Code: EME168-70-23-R2 KIT
  • Quantity In Stock: 10
  • $56.95

  • Export: $51.77

Available Options

Related Products

23cm 1296MHz UHF RX/TX Preamplifier

23cm 1296MHz UHF RX/TX Preamplifier

Priced from

$109.50 Export: $99.55

70cm 430MHz UHF RX/TX Preamplifier

70cm 430MHz UHF RX/TX Preamplifier

Priced from

$79.95 Export: $72.68