The EME200 Universal Microwave PC board was designed as a low cost way of experimenting on the microwave bands, and allows the fitting of two RF amplifier devices, a single pipe-cap cavity filter, and RF mixer. The board can also be used to construct local oscillator multipliers, low noise amplifiers, RX/TX converters, and RF driver amplifiers. Test with the FR4 board material against the original EME171 RO4003 material board showed similar results with only the gain being maybe a 1dB lower at 5GHz. The FR4 is also much easier to solder pipecaps to as it is solder leveled.
Size: 64mm long, 38mm wide, 1.0mm FR4 PC board material. EME171 KIT WEBPAGE
Amplifiers: Mini-Circuits MAR, ERA, Gali, Avago, MSA, MGA86563, NEC, NE3201S01, NE3512S02, BGU8051, BGU8053
Mixers: Mini-Circuits MCA series, ADE-1, 2, 5, 6, 11x, 30+, JMS-1, 2, 11x,
Filters: copper pipecaps, 1/2", 5/8", 3/4", 7/8", 1 1/8", Mini-Circuits HFCN, LFCN.
Regulators: In a D Pak package.
-Ve Bias Generator: TPS60400
No Kit instructions or data sheets are supplied with bare PC boards.
EME200 Microwave Experimenter PC board
- Brand: Mini-Kits
- Product Code: EME200-PCB
- Quantity In stock: 123