The Mini-Kits EME204 9MHz IF AGC Amplifier Kit is part of a building block to construct a high performance M1 Series HF Transceiver.  The module board incorporates a 9MHz high gain amplifier with automatic gain control, AM demodulator, and S-meter circuit.   The circuit design is based on older Transceiver designs from the mid to late 1980's that were analogue in design, but we have used modern BF904 MosFETs that are specifically designed for AGC applications, to improve the AGC performance especially with strong signals.  This module has been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but is also ideal to construct you own Receiver or Transceiver design.

For more detailed information on how this module Kit can be used, Please refer to the EME204 Kit webpage.

This Kit is ideal for all constructors mainly due to the use of conventional leaded components.  Only a very small number of surface mount components have been used due to component availability.  The basic Kit includes the PC board and all onboard components, but excludes the SMA connectors which can be purchased separately if required.

For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.

EME204 KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. Requires complete construction, and soldering of some SMD components.

2 x SMA39 connectors are recommended to use with inter wiring of the module board Kits.

1 x IDC16S connector is recommended to use with inter wiring of the module board Kits.

Hammond 1590BBFL enclosure or similar is required to fully shield the module board from other RF circuitry.

PC boards are not available separately as this Kit uses a number of specialized components that are not easily obtainable in low quantities.

Kits Do Not include miscellaneous hardware, enclosure, or RF connectors, but do include the 2.54mm on board headers.

Specifications
Input Frequency:
9MHz input 50ohms
IF Gain:
85dB No AGC ( Typically 33dB with AGC )
Noise Figure:
2dB @ 9MHz
Input Level:
-100dBm minimum
Input IP3:
+3dBm @ 9 MHz
9MHz IF Output:
Typically -27dBm ( depends on alignment )
Operating Voltage: +10 to 15vdc ( +12vdc @ 50mA )
Board Size: 105mm L x 73mm W x 20mm H

For more information see the EME204 KIT WEBPAGE

M1 Series 9MHz IF AGC Amplifer

  • Brand: Mini-Kits
  • Product Code: EME204-KIT
  • Availability: 30
  • $55.00


Available Options


Accessories

IDC16S 8x2 DIL 2.54mm

IDC16S 8x2 DIL 2.54mm

Price $0.77 ea

Hammond 1590BBFL Enclosure

Hammond 1590BBFL Enclosure

Price $16.50 ea



Related Products

M1 Series 10dB HF Amplifier
M1 Series ADE-1 HF Mixer Amplifier
M1 Series 9MHz Crystal Filter
M1 Series 9MHz BFO Demodulator
M1 Series Preselector Filters
M1 Series 500mW Audio Amplifier
Hammond 1590BBFL Enclosure
M1 Series Low Pass Filters
M1 Series HF Attenuator 9MHz Trap