This modern High Performance 3.4GHz 2Watt Power Amplifier uses the TC3341 PHEMT MMIC, and is matched internally for a gain of 27dB and a saturated output power of more than +33dBm. The PA is suitable for linear and non linear modes, including SSB and FM Television. The design uses a 500kHz switching power supply to provide high efficiency over a +9 to +14 volt DC input range. The PA uses a ceramic based PC board and incorporates bias protection circuitry to protect the amplifier. Please Note: This PA cannot be used for Wireless LaN or ( WiFi ) as it is not Bi-Directional.
THIS PRODUCT IS NO LONGER AVAILABLE AND IS SOLD OUT
EME141-3400 KIT is the Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction, and soldering of very tiny SMD components.
EME141-3400 PCB Only includes the PC board and Kit construction notes.
Labour is extra to solder the TC3431 chip to the board.
Please Note: For most applications using FM, You will require a Heat sink with at rating of at least 4.5 degrees C per watt. No Tuning is Required, but either a power meter or Spectrum Analyzer would be useful to check the output power.
Kits Do Not include connectors, miscellaneous hardware, or heat-sink This Kit is for Very Advanced
constructors Only, and requires experience in surface mount
soldering, along with metal working tools to complete successfully.
Specifications | |
---|---|
Frequency Range: |
3.3 to 3.7GHz @ 1dB |
Gain: | 27dB minimum |
RF Input: |
3.2mW ( +5dBm ) for 1.6 Watt ( +32dBm ) Output |
RF Output: |
1.8 Watts ( +32.5dBm @ 1dB compression ) |
OpIP3: | +42dBm |
Operating Voltage: | +9 to 14vdc ( +12vdc @ 470mA ) 500kHz switching supply |
Board Size: | 47.5mm L x 37mm W x 10mm H ( without Heat-sink ) |
9cm 3.4GHz 2W Amplifier Kit
- Brand: Mini-Kits
- Product Code: EME141-3400 KIT
- Quantity In Stock: Discontinued Product
-
$97.00
- Export: $88.18