EME247 2 Way 50ohm Splitter/Combiner Kit

EME247-2W-1M-2.7G
Mini-Kits 2 Way 50Ω 1-2700MHz Splitter/Combiner

 

Please Note: that all information including pictures on this web page are copyright to Mini-Kits and must not be used on any other web site, or reproduced in any publication.

EME247 PC Board Description:

The EME247 PC board was released in June 2021 and is designed to fit a standard aluminium extruded enclosure. The EME247 PC board was designed to construct receive only Bias Tee, ( DC Power Injectors ) and a 2 Way 50Ω Splitter/Combiner the HF to SHF bands.

EME247-2W-1M-2.7G Product Notes:

The EME247-2W-1M-2.7G 2Way 50Ω 0 degree 1 to 2700MHz splitter can be used to either split, or combine RF signals. It is ideal for use as a receive antenna
splitter to split the incoming signal into two signal paths to feed two separate receivers. The design uses a Macom MAPD- 008957-CT0012, refer to the device data sheet for more information. BUY THIS PRODUCT

EME237-2W-1M-2.7G PCB Top View
The picture shows the EME247-2W-1M-2.7G 2 Way 50ohm Splitter module with optional SMA connectors.
EME247-splitter-isolation
This plot shows the S21 isolation between ports 1 and 2.
EME247-splitter-S21-Input-Port1-100kHz-10MHz
This plot shows the S21 loss from the Input to Port 1 from 100kHz to 10MHz
PGA-103-H1-S21
This plot shows the S21 loss from the Input to Port 2 from 100kHz to 10MHz
EME247-splitter-S21-Input-Port1-10MHz-2.7GHz
This plot shows the S21 loss from the Input to Port 1 from 10MHz to 2.7GHz
PGA-103-H1-S21
This plot shows the S21 loss from the Input to Port 2 from 10MHz to 2.7GHz

Product Changes and Updates:

EME247-2W-1M-2.7G

1/ There are no changes to this product.