The 0.85 to 1.8GHz frequency multiplier is constructed on a EME228 PC board, and has been specifically designed as a local oscillator multiplier for the Mini-Kits EME227-23CM 2400MHz Transverter, and can also be used for RX converters, or as a multiplier for ATV. A Mini-Kits designed 2 section filter is used to effectively filter out harmonics and oscillator noise allowing Transverter I/F frequencies down to 144MHz to be used.  Please refer to the Application Block Diagram on how this Kit is used.  The tune-able filter allows the Kit it to be used on frequencies from approximately 850MHz to 1.8GHz, see the EME227 Series Multiplier Kit Webpage for more information. 

If Required, an Optional Mini-Circuits LFCN Low Pass Filter can be added to effectively suppress harmonics.

The Product image shows a fully constructed Kit product with Optional SMA connectors.  Please refer to the Options Tab for the descriptions of the various products available.

EME-1.8G-MLT KIT Multiplier Kit is the Basic +10 to +16dBm output Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.

Kits Do Not include connectors, miscellaneous hardware, or an enclosure. For advanced constructors Only.
Specifications See Kit Webpage for detailed tests
Frequency Range:
850 to 1800MHz ( tune-able filter )
Filter Bandwidth:
< 50MHz @ 1dB, < 160MHz @ 20dB( 1152MHz )

RF Input:
0 to +3dBm @ 576MHz
RF Output:
depends on input frequency and drive level, ( 0dBm 576MHz drive for +10-16dBm max 1152MHz output )
Operating Voltage: +10 to 15vdc 78M09 regulator ( +12vdc @ 120mA )
Board Size: 65mm L x 30mm W x 15mm H

For more information see the EME228 Series Multiplier KIT WEB PAGE

Please refer to the Application Block Diagram on how this Kit is used.

0.85-1.8GHz Frequency Multiplier

  • Brand: Mini-Kits
  • Product Code: EME228-1.8G-MLT
  • Quantity In stock: 10
  • $34.95

Available Options


Related Products

23cm 1.24 to 1.3GHz Transverter Rev2