The ESP-01S 4 Channel WiFi Switch module was designed to interface an Ai Thinker ESP-01S Wifi module to switch power Mos FETs to drive 12v relays, or power other circuitry. The module can switch a total combined maximum current of 500mA through the 4 switches, which are limited by the onboard PTC current protection. A simple WEB interface is used over a WIFI network allowing easy controlling of the switches. For more information on the ESP-01S module and programming see the Kit webpage for the data sheet. The constructor must be willing to learn the Arduino IDE software and be capable of simple changes to the software file, ( ide ) to successfully complete this Kit.
THIS KIT IS IDEAL FOR CONSTRUCTORS WITH SOME SOLDERING EXPERIENCE AND WANTING TO LEARN SMD CONSTRUCTION
The Product picture shows a completed EME216 KIT product. For more information see the EME216 Kit Webpage
EME216-KIT is a Basic Kit that includes the PC board, Instructions, and all on board components including the ESP-01S module and connectors. No enclosure is included. Requires Complete construction.
These Kits are Ideal for constructors with some soldering experience willing to fit some SMD components, and learn the Arduino IDE software to program the module.
|Frequency Range: ||2.4GHz ESP-01S Module|
|Switched Outputs:||4x MosFET +12vdc DC outputs, combined 500mA maximum current |
|Radio Range:||> 20 Metres |
|Operating Voltage: ||+19 to +13.8vdc ( +14vdc maximum )|
|Operating Current: ||Typically <100mA @ +12vdc with no load, 500mA maximum load |
|Control Input Voltage:||+2 to +12vdc ( +15vdc maximum )|
|Board Size:||54mm L x 41mm W x 22mm H ( with connector fitted ) |
For more information please see the EME216 KIT WEBPAGE
ESP-01S 4 Channel WiFi Switch
- Brand: Mini-Kits
- Product Code: EME216-KIT
- Quantity In stock: 6