The PIC16F648A controller Kit has primarily been designed as a PIC Micro controller and interface for the AD9851 DDS VFO and I/Q DDS Kits. The Kit can be used as a general purpose Micro controller board to suit your own DDS, or other Project using your own software. The board allows for interfacing of a 4x4 Keypad, LCD Display, and various input and output circuitry using on board Headers. The Kit is designed to use a PIC16F648A, and most pins are available on the header connections around the outside of the board. Many other PIC16F6XX series chips can also be used on this board.
For a low cost DDS solution using the low cost AD9850 Chinese DDS modules, refer to the DDS-VFO page that has more information on what is required.
The Product image shows a fully
constructed Kit product. Please refer to the Options Tab for the
descriptions of the various products available.
Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.
EME170 KIT1 is the Basic Kit that includes the PC board, Instructions, and all on board components. and Header connectors. Does Not include a LCD module, LCD Interface, Keypad, Knob, ribbon cable, or software. Requires complete construction.
EME170 KITB This is a fully built and tested board with DDS Ver2.3 software pre-programmed. Does Not include a LCD module, Keypad, Knob, or ribbon cable. Requires wiring to the LCD module and keypad etc with ribbon cable.
The LCD Module, Keypad, Control Knob, ribbon cable, and DDS Kits are all optional and not included with the EME170 kit or built product. Please Note: That no Software or Software support is included with the Basic Kit.
|Micro-controller:||Microchip PIC16F648A-20A |
|Clock:||Uses internal clock |
|Data Interface:||Clock, serial data, optional I2C bus |
|Digital Interface: ||Up to 13 inputs / outputs available |
|Operating Voltage:||+12 to 14vdc ( +12vdc @ 50mA )|
|Board Size:||65mm L x 48.5mm W x 30mm H ( without knob ) |
- Brand: Mini-Kits
- Product Code: EME170 KIT
- Quantity In stock: 10