The PHA-1 amplifier is a simple wideband design which is suitable as a driver amplifier for complex RF waveforms, or as a low noise high dynamic range gain block in a receiver. A PHA-1 MMIC, ( Monolithic Microwave Integrated Circuit ) is used, and has a high OpIP3, and produces up to +22dBm output from 70MHz to 3GHz. Please refer to the PHA-1+ Data Sheet for further information.  A 78M05 regulator is mounted under the board for +7 to 15vdc operation.

The Product image shows a fully constructed PHA-1 KITB1 product.  Please refer to the Options Tab for the descriptions of the various products available.

Please Note: We no longer have the time to construct this Kit and offer it as a built product.

PHA-1 KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction.

PHA-1 PCB Only includes the PC board and Kit construction notes.

Basic Kits Do Not include connectors, miscellaneous hardware, or enclosure. The 2.1mm DC cable is optional and not supplied with Products. Ideal for beginner to average constructor.

Please Note: We no longer have the time to construct this Kit and offer it as a built product.

Specifications
Frequency Range: 70MHz to 2GHz, and 300MHz to 3GHz versions available
Gain Typically: 17dB @ 50MHz, 15.7dB @ 800MHz, 13.5dB @ 2GHz, 11.8dB @ 3GHz
Noise Figure:
1.7dB @ 50MHz, 1.9dB @ 1GHz, 2.2dB @ 2GHz
OpIP3:
+41dBm @ 1GHz with ICC 100mA
Output Power:
+22dBm +/- 1dB from 50MHz to 3GHz +4vdc @ 90mA )
Operating Voltage: + 7 to 15vdc ( +12vdc @ 100mA Recommended )
Board Size: 45mm L x 32mm W x 15mm H

For more information see the PHA-1 KIT WEBPAGE

PHA-1 Driver Amp +21dBm 0.07-3GHz

  • Brand: Mini-Kits
  • Product Code: PHA-1 KIT
  • Quantity In stock: 30
  • $25.50


Available Options


Accessories



Related Products

PHA-1 MMIC Amplifier
EME162 PC board