The PHA-1 amplifier is a simple wideband design which is suitable as a driver amplifier for complex RF waveforms, or as a low noise high dynamic range gain block in a receiver. A PHA-1 MMIC, ( Monolithic Microwave Integrated Circuit ) is used, and has a high OpIP3, and produces up to +22dBm output from 70MHz to 3GHz. Please refer to the PHA-1+ Data Sheet for further information. A 78M05 regulator is mounted under the board for +7 to 15vdc operation.
The Product image shows a fully constructed PHA-1 KITB1 product. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.
PHA-1 KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction, and soldering of SMD components.
PHA-1 KITB1 Is a fully constructed and tested PC board Kit including SMA female connectors For 70MHz to 2GHz. No enclosure is included.
PHA-1 KITB2 Is a fully constructed and tested PC board Kit including SMA female connectors For 300MHz to 3GHz. No enclosure is included.
PHA-1 B1-ENC Is a fully constructed 70MHz to 2GHz in a diecast enclosure with female SMA, and 2.1mm DC socket. The 2.1mm DC cable is Optional
PHA-1 B2-ENC Is a fully constructed 300MHz to 3GHz in a diecast enclosure with female SMA, and 2.1mm DC socket. The 2.1mm DC cable is Optional
PHA-1 PCB Only includes the PC board and Kit construction notes.
Option2 Select where you want the PHA-1 mounted on the board. For
Receive applications the PHA-1 is mounted close to the input connector
for a lower noise performance, allowing for an optional output
attenuator to be fitted to the board. For Transmit driver applications
the PHA-1 is mounted close to the output connector allowing for an
optional input attenuator to be fitted to the board.
|Frequency Range:||70MHz to 2GHz, and 300MHz to 3GHz versions available |
|Gain Typically:||17dB @ 50MHz, 15.7dB @ 800MHz, 13.5dB @ 2GHz, 11.8dB @ 3GHz |
|Noise Figure: ||1.7dB @ 50MHz, 1.9dB @ 1GHz, 2.2dB @ 2GHz |
|OpIP3: ||+41dBm @ 1GHz with ICC 100mA |
|Output Power: ||+22dBm +/- 1dB from 50MHz to 3GHz +4vdc @ 90mA ) |
|Operating Voltage:||+ 7 to 15vdc ( +12vdc @ 100mA Recommended )|
|Board Size:||45mm L x 32mm W x 15mm H|
For more information see the PHA-1 KIT WEBPAGE
PHA-1 Driver Amp +21dBm 0.07-3GHz
- Brand: Mini-Kits
- Product Code: PHA-1 KIT
- Quantity In stock: 30