The 3400MHz filter has been specifically designed to be used with the EME3.4G-MLT Multiplier KIT1 to provide extra filtering of the 3400MHz signal for a cleaner RF output. The pipe-cap supplied allows the Kit it to be used on frequencies from approximately 2.7 to 4.5GHz.  Please refer to the Application Block Diagram on how this Kit is used.

The Product image shows a fully constructed Kit product.  Please refer to the Options Tab for the descriptions of the various products available.

For use with a Transverter, it is highly recommended that both the EME3.4G-MLT KIT1and EME3.4-FIL KIT1 are purchased to provide the required filtering of the Local Oscillator signal. For basic receive only, you could use the EME3.4G-MLT KIT1.

A Metric M5 Tap and 0.9mm drill bit is required to construct this Kit.