The PGA-103 amplifier is ideal as a Very Low Noise high dynamic range amplifier for use between 50MHz and 1.3GHz. The amplifier is also suitable as a driver amplifier for complex RF waveforms, and produces up to +21dBm output on 400MHz. The PGA-103 is specified to 4GHz, but the gain is very non linear and is 10dB lower at 1.3GHz compared to 100MHz. Please refer to the PGA-103+ Data Sheet for further information. A 78M05 regulator is mounted under the board for +7 to 15vdc operation.
For use on lower frequencies under 50MHz please see the Mini-Circuits Technical Note AN-60-064
All Built Products have been replaced with the New Mini-Kits PGA103-WB-R2 Amplifier Modules
The Product image shows a fully constructed GALI-39 KIT product. Please refer to the Options Tab for the descriptions of the various products available.
PGA-103-WB-KIT is a Basic Wideband Kit that includes the PC board, Instructions, and all on board components. Requires complete construction, and soldering of SMD components.
PGA-103 PCB Only includes the PC board and Kit construction notes.
Kits Do Not include connectors, miscellaneous hardware, or enclosure. For experienced constructors with some SMD construction experience.
Built Products have been replaced with the New Mini-Kits MGA31189-R2 Amplifier Modules
|Frequency Range:||100MHz to 1GHz
|Gain Typically:||24.5dB @ 145MHz, 21.3dB @ 435MHz, 13.4dB @ 1.2GHz
||0.45dB @ 145MHz, 0.35dB @ 435MHz, 0.8dB @ 1.2GHz
||+39dBm @ 435MHz, with ICC 90mA
||+21dBm @ 145MHz, +21.5dBm @ 435MHz ( +4.5vdc @ 90mA )
|Operating Voltage:||+ 7 to 15vdc ( +12vdc @ 90mA Recommended )|
|Board Size:||45mm L x 32mm W x 15mm H|
PGA-103 Low Noise Amp 0.05-3GHz
- Brand: Mini-Kits
- Product Code: PGA-103 KIT
- Quantity In stock: 10