The PGA-103-915M-R2 is a high dynamic range low noise receive only wide-band amplifier that is specifically designed for use between 902 and 928MHz.   The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier.  Please refer to the PGA-103+ Data Sheet for further information.

This Product is only available as a built and tested module or in an enclosure and is not available as a Kit.  Products include a 2.1mm DC power cable.  Please refer to the Options Tab for the descriptions of the various products available.

Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in a few days.

PGA103-915M-R2-B Is a fully constructed and tested 915MHz PC board Amplifier with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable

PGA103-915M-R2-ENC Is a fully constructed 915MHz amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable

Frequency Range: CF 915MHz ( BW 26MHz @ 3dB ) 902 to 928MHz
Band Rejection:>40dB @ 850MHz >40dB @ 1000MHz
Gain Typically: 16dB +/-1dB  @ 915MHz
Noise Figure:
1dB @ 915MHz, ( Typically <0.7dB )
Operating Voltage: + 7 to 15vdc ( +12vdc @ 90mA Recommended )
Board Size: 37mm L x 41mm W x 15mm H ( Does not inc SMA length )
Enclosure Size: 43mm L x 44mm W x 23.3mm H ( Does not inc SMA length )

For more information see the PGA103-915M-R2 Product WEBPAGE

PGA-103-915M Low Noise RX Amplifier 902-928MHz

  • Brand: Mini-Kits
  • Product Code: PGA103-915M-R2
  • Quantity In stock: 2
  • $74.95

Available Options


Related Products

PGA-103 High Dynamic range MMIC Amplifier 0.05-4GHz
PGA-103 Low Noise Amp 0.05-3GHz
PGA-103-WB Wide-band Low Noise RX Amplifier 0.1-2GHz
GALI-84-R2 +21dBm Driver Amplifier DC-4GHz
Bias Tee for Receive Only Amplifiers