The 3400MHz Driver Amplifier has been specifically designed as a TX Driver Amplifier for the Mini-Kits 3400MHz Transverter. The amplifier has 32dB gain and uses a pipe-cap cavity filter to effectively filter out of band signals, and a Gali-84 amplifier produces up to +20dBm output. The pipe-cap supplied allows the amplifier to be used on frequencies from approximately 2.7 to 4.5GHz.  Please refer to the 9cm Transverter Block Diagram on how this Kit is used.

The Product image shows a fully constructed Kit product with an optional module.  Please refer to the Options Tab for the descriptions of the various products available.

EME3.4G-AMP1 KIT Multiplier Kit is the Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.

EME3.4G-AMP1 PCB Includes Only the PC board and Kit instructions. No on board Components are included.

Constructed products are not currently available.

Kits Do Not include connectors, miscellaneous hardware, or an enclosure. A Metric M5 Tap and 0.9mm drill bit is required to construct this Kit. For advanced constructors Only.

Frequency Range: 2700MHz to 4500MHz ( with 7/8" Pipe cap )
Gain Typically: 32dB @ 3400MHz
Bandwidth: 35MHz @ 3dB 3400MHz
Input Power:
Output Power:
+20dBm @ 1dB compression for -12dBm input
Operating Voltage: + 7 to 12vdc ( +12vdc @ 135mA Recommended )
Board Size: 64mm L x 38mm W x 45mm H

For more information see the EME3400 KIT WEBPAGE

Please refer to the 9cm Transverter Block Diagram on how this Kit is used.

3400MHz Driver Amp +20dBm

  • Brand: Mini-Kits
  • Product Code: EME3.4G-AMP KIT1
  • Quantity In stock: Pre-Order
  • $40.95

Related Products

2700-4500MHz Frequency Converter with a +7dBm Mixer
400 to 640MHz Low Phase Noise Butler Oscillator