10 to 30MHz x3 Multiplier for GPS locking the Icom IC910 and 9100 Transceivers to a 10.066667MHz GPS or rubidium reference. The Kit uses the Gali-84 amplifier and a two section 30MHz band pass filter to produce a very clean and filtered output suitable for locking the Transceiver. Typical output is +5dBm and may require some attenuation to interface with the oscillator circuitry.
Please Note that Mini-Kits cannot provide any detailed information on how to use or install this product inside an Icom Transceiver.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
GALI-84-30M KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.
GALI-84-30M-B Is a fully constructed and tested module board with female SMA connectors.
GALI-84-30M-ENC Is a fully constructed multiplier in a Hammond 1550Q enclosure with female SMA, and 2.1mm DC socket. The 2.1mm DC cable is Optional
GALI-84-30M PCB Includes Only the PC board and Kit construction notes.
Kits Do Not include connectors, miscellaneous hardware, or enclosure etc. For advanced constructors Only.
|Frequency Input: ||10.066667MHz |
|Frequency Output: ||30.2MHz |
|RF Output: ||+5dBm @ 30.2MHz |
|Operating Voltage:||+10 to 15vdc ( +12vdc @ 100mA Recommended )|
|Board Size:||45mm L x 32mm W x 10mm H|
30MHz IC910 Multiplier
- Brand: Mini-Kits
- Product Code: GALI-84 30MHz Multiplier
- Quantity In stock: 10