The EME161B SP5055 PLL control Kit uses a PIC 16F628 micro-controller and was designed for use with the EME161A SP5055 PLL Kit. The EME161B control Kit can also be used with other products that use the SP5055 and TSA5055 PLL IC's. The Kit adds functionality to the basic EME161A PLL kit adding a EC12E rotary encoder for tuning control, memory channels, separate TX/RX VFO's, display and frequency offset, and band switching. The rotary encoder along with 2 x optional switches and LCD display are used to set all functions including menu settings.
The Product image shows a fully
constructed Kit product. Please refer to the Options Tab for the
descriptions of the various products available.
Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in few days.
EME161B KIT is the basic kit that includes the PC board, all on board components, Headers, and Pre-programmed with Synth_21 Ver 2.10software. Requires Construction.
EME161B KITB is the fully built and tested EME161B Kit.
EME161B PCB Includes Only the PC board and Kit construction notes. No on board components are included.
Kits and built products Do Not include any miscellaneous hardware or enclosure. For complete operation these products require a 16x2 LCD, 2x push button momentary switches, and a tuning knob to suit a 6mm diameter shaft encoder which are available as options.
|Frequency Range: ||100MHz to 2.8GHz ( SP5055 PLL )|
|Display Multiplier: ||x1 to x20|
|Frequency Steps: ||100kHz, 200kHz, 400kHz, 800kHz, 1MHz, ( with a 3.2MHz Crystal ) |
|RX/TX Offset: ||0 to +/- 3.2GHz |
|Bands:||Up to 5 using an optional rotary switch |
|Operating Voltage:||+8 to 15vdc ( +12vdc @ 10mA No LCD Backlight ) |
|Board Size:||40mm L x 65mm W x 20mm H|
SP5055 PLL Control Board
- Brand: Mini-Kits
- Product Code: EME161B KIT
- Quantity In stock: 20