The GALI-84-R2 is idea as a wide band high gain driver amplifier with up to +21dBm output @ 1dB compression, and is available in 3 frequency range options for use between 0.5MHz and 4GHz. Only around 0dBm 1mW is required to drive the amplifier to full power. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the GALI-84+ Data Sheet for further information.

This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.

GALI-84L-R2-B Is a fully constructed and tested 0.5MHz-1GHz PC board Amplifier with female SMA, and 2.1mm DC socket.

GALI-84M-R2-B Is a fully constructed and tested 100MHz-2GHz PC board Amplifier with female SMA, and 2.1mm DC socket.

GALI-84H-R2-B Is a fully constructed and tested 300MHz-4GHz PC board Amplifier with female SMA, and 2.1mm DC socket.

GALI-84L-R2-ENC Is a fully constructed and tested 0.5MHz-1GHz Amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket.

GALI-84M-R2-ENC Is a fully constructed and tested 100MHz-2GHz Amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket.

GALI-84H-R2-ENC Is a fully constructed and tested 300MHz-4GHz Amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket.

All Products come with a 2.1mm DC Power cable

Specifications
Frequency Range:	0.5MHz to 1GHz, 100MHz to 2GHz, 300MHz to 4GHz versions available
Gain Typically:	22.6dB @ 500kHz, 23dB @ 1MHz, 25dB @ 50MHz, 24dB @ 500MHz, 22dB @ 1.2GHz, 18.5dB @ 2.4GHz
Noise Figure:	Typically < 4.6dB across the frequency range
OpIP3:	+37.5dBm @ 1GHz with ICC 100mA
Output Power:	+21.9dBm @ 100MHz, +21.5dBm @ 1.2GHz, +21dBm @ 2.4GHz
Operating Voltage:	+ 9 to 15vdc ( +12vdc @ 100mA Recommended )
Board Size:	37mm L x 41mm W x 15mm H ( Does not inc SMA length )
Enclosure Size:	43mm L x 44mm W x 23.3mm H ( Does not inc SMA length )