The GALI-39-R2 is idea as low noise wide band high gain amplifier for use between 0.1MHz and 4GHz. The GALI-39L-R2 has now been changed to GALI-39L-R3 for a lower frequency response down to 100kHz which is suitable for 137 and 472kHz. The amplifier is ideal as a <2.5dB NF low noise receiver or transmitter +20dB gain block from DC to 2GHz, but it is not recommended that it is used as a wide-band antenna amplifier due to the low input IP3. The product is available in 3 frequency range options for use between 0.5MHz and 4GHz. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the GALI-39+ Data Sheet for further information.
This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.
GALI-39L-R3-B Is a fully constructed and tested 0.1MHz-350MHz PC board Amplifier with female SMA, and 2.1mm DC socket.
GALI-39M-R2-B Is a fully constructed and tested 100MHz-2GHz PC board Amplifier with female SMA, and 2.1mm DC socket.
GALI-39H-R2-B Is a fully constructed and tested 340MHz-4GHz PC board Amplifier with female SMA, and 2.1mm DC socket.
GALI-39L-R2-ENC Is a fully constructed and tested 0.5MHz-1GHz Amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket.
GALI-39M-R2-ENC Is a fully constructed and tested 100MHz-2GHz Amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket.
GALI-39H-R2-ENC Is a fully constructed and tested 340MHz-4GHz Amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket.
All Products come with a 2.1mm DC Power cable
| Specifications | |
|---|---|
| Frequency Range: | 0.1MHz to 1GHz, 100MHz to 2GHz, 340MHz to 4GHz versions available |
| Gain Typically: | 22dB @ 500kHz, 22dB @ 1MHz, 22dB @ 50MHz, 22dB @ 500MHz, 21dB @ 1.2GHz, 19dB @ 2.4GHz |
| Noise Figure: | Typically < 2.5dB under 3GHz |
| OpIP3: | +22.9dBm @ 2GHz with ICC 35mA |
| Output Power: | +12dBm @ 100MHz, +11.5dBm @ 1.2GHz, +11.5dBm @ 2.4GHz |
| Operating Voltage: | + 9 to 15vdc ( +12vdc @ 35mA Recommended ) |
| Board Size: | 37mm L x 41mm W x 15mm H ( Does not inc SMA length ) |
| Enclosure Size: | 43mm L x 44mm W x 23.3mm H ( Does not inc SMA length ) |
For more information see the GALI-39-R2 Product WEBPAGE
GALI-39-R2 Amplifier +20dB DC-4GHz
- Brand: Mini-Kits
- Product Code: GALI-39-R2
- Quantity In Stock: 2
-
$71.00
- Export: $64.55
Available Options
Accessories
Enter desired quantity before clicking Add to Cart button
BNA13 BNC Female to SMA Male Adapter
$3.95 Export: $3.59
- Total:
- Export Total:
Related Products
