The Mini-Kits EME234 HF Magnetic Loop Antenna module has been designed to be easy to install, and covers a usable wide frequency range from 0.5 to 60MHz. It is particularly useful for those that have antenna restrictions or limited space to install a full size HF receive antenna, or have very high man made noise levels. The magnetic loop is particularly effective at reducing power line and common mode type noise and being a figure 8 pattern with vertically polarized signals, can be rotated to further notch interference. The amplifier incorporates static and lightning protection, and has a broadband 50ohm output impedance suitable for driving most receivers. The amplifier is designed to be used with a 1 metre single turn loop, and a balanced low input impedance common base amplifier is used to match the input. Low cost RF Transistors are used as the active devices, which produce high output second and third order figures reducing the possibility of inter modulation on received signals. The design incorporates power supply decoupling so that power can be fed to the Active circuit via the coaxial cable.

The Product image shows a fully constructed EME234B-M Module product without connector.  Please refer to the Options Tab for the descriptions of the various products available. It is recommended that the EME195 HF Bias Tee or EME215 HF RX Active Switch Kit is used to feed the power supply voltage up the coaxial cable to power the active antenna. For more detailed information on how this module Kit can be used, Please see the EME234 Kit webpage

EME234-KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. Do Not construct this Kit unless you are very experienced with SMD construction and have the required soldering tools.

EME234B-M is a fully constructed and tested PCB Module without a connector.

Enclosure Option ( Preamps )  Select either No Enclosure, or the GME Masthead Enclosure.

Connector Option1 Select either No Connector, F Type Female, or BNC Type Female.

The Kit and module products Do Not include the loop antenna, Bias tee, coaxial cable, or hardware.

Specifications
Frequency Range:
1 to 50MHz @ 3dB
Gain: +19dB from 1 to 30MHz
1dB compression:
+19dBm
OpIP3: +39dBm
OpIP2: +110dBm
O/P Noise Power:
-113dB @ 10MHz
Output Return Loss:
> 10dB from 3 to 30MHz
Operating Voltage: +13 min to 15vdc max @ 150mA ( +13.8vdc recommended )
Board Size: 83mm L x 65mm W x 20mm H

For more information see the EME234 KIT WEBPAGE

HF Magnetic Loop Antenna Module 1 to 50MHz

  • Brand: Mini-Kits
  • Product Code: EME234-KIT
  • Quantity In Stock: 106
  • $51.95

  • Export: $47.23

Available Options


Related Products

12vdc 2.08A 25W Desktop AC Apapter

12vdc 2.08A 25W Desktop AC Apapter

Priced from

$36.95 Export: $33.59

Bias Tee for Receive Only Amplifiers

Bias Tee for Receive Only Amplifiers

Priced from

$14.50 Export: $13.18

HF Active Receive Antenna Switch

HF Active Receive Antenna Switch

Priced from

$79.95 Export: $72.68

12vdc 600mA Linear Plugpack

12vdc 600mA Linear Plugpack

Priced from

$13.95 Export: $12.68