The MGA-31189 amplifier is a high gain 0.25W driver amplifier for use between 100 and 2000MHz, and is ideal for complex RF waveforms, or as a low noise high dynamic range gain block in a receiver. This amplifier is ideal as a driver for the BATC DTX-1 DATV Transmitter, for driving a RA18H1213G module to a very linear 5 Watts output. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the MGA-31189 Data Sheet for further information.
This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in a few days.
MGA31189-R2-B Is a fully constructed and tested Wide band PC board Amplifier with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
MGA31189-R2-ENC Is a fully constructed Wide band amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
|Frequency Range:||100MHz to 2GHz |
|Gain Typically:||20.5dB @ 145MHz, 20.3dB @ 435MHz, 19.2dB @ 1.2GHz |
|Noise Figure: ||2.7dB @ 450MHz, 2dB @ 900MHz, 1.8dB @ 1500MHz |
|OpIP3: ||+41.5m @ 450MHz, +42dBm @ 900MHz|
|Output Power: ||+23.7dBm @ 450MHz, +24dBm @ 900MHz |
|Operating Voltage:||+ 7 to 15vdc ( +12vdc @ 90mA Recommended )|
|Board Size:||37mm L x 41mm W x 15mm H ( Does not inc SMA length ) |
|Enclosure Size:||43mm L x 44mm W x 23.3mm H ( Does not inc SMA length ) |
For more information see the MGA31189-R2 Product WEBPAGE
MGA31189 +24dBm Driver Amplifier 0.1-2GHz
- Brand: Mini-Kits
- Product Code: MGA31189-R2
- Quantity In stock: 20