The 1.2GHz +27dBm ( 500mW ) amplifier is a highly linear driver amplifier that is ideal for use with digital modulation and linear modes. The amplifier uses an ATF50189 PHEMT which is specified at around 17dB gain, and with +10dBm ( 10mW ) input, the amplifier will produce around +27dBm, ( 500mW ) output. The Amplifier is suitable for driving a Mitsubishi RA18H1213G module to full power.
A suitable +5vdc @ 280mA power supply is required to power this amplifier. It is recommended that a switching supply like the LM2596 DC-DC module is used, as a linear regulator like a 7805T would require substantial heat sinking.
The Product image shows a fully constructed EME162-1200-KIT with optional SMA connectors. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: This product is available as a Kit only and is not available as a built Module.
EME162-1200-R2 KIT is a Basic Kit that includes the PC board, Instructions, all on board components, and small heat-sink, SMA connectors are Not included. Requires complete construction and soldering of small SMD components.
This Product is no longer available as a built module
Kits Do Not include connectors, miscellaneous hardware, or enclosure. The EME162-1200-R2 Kit is for advanced constructors Only.
|Frequency Range: ||1240 to 1300MHz |
|Gain: ||17dB minimum, ( Typically around 19dB ) |
|Gain Bandwidth: ||200MHz @ 1dB, 550MHz @ 3dB 1290MHz |
|Input Power: ||10mW ( +10dBm ) for 550mW ( +27.5dBm ) Output |
|Output Power: ||500mW ( +27.5dBm ) @ 1dB compression |
|Operating Voltage:||+5vdc @ 280mA|
|Board Size:||45mm L x 32mm W x 15mm H|
For more information see the EME162-1200 KIT WEBPAGE
23cm 1.2GHz 0.5W +27dBm Amplifier
- Brand: Mini-Kits
- Product Code: EME162-1200-R2 KIT
- Quantity In stock: 14