The complete 13cm Band 2300 to 2390MHz Transverter is suitable for countries that have access to the lower 2.3GHz band, and is constructed on a professionally etched 80x65mm FR4 PC Board. The design is no tune so requires no alignment as it uses SAW filters and can be used with either a 147 or 435MHz I/F. The receiver uses a low noise MGA86563 PHEMT, and the transmit driver amplifier produces up to +19dBm output. The Transverter can handle up to 5 Watts input from either a 147 or 435MHz Transceiver as it has an on board attenuator and RF sensing circuit for switching from RX to TX mode. This Transverter cannot be used or modified for use above 2400MHz due to the SAW filters. This Kit requires a suitable low noise +7dBm Local Oscillator, either 2157MHz for 147MHz, 1869MHz for 435MHz.
Refer to the 13cm 2400MHz Transverter Block Diagram for more information on what is required.
THIS KIT IS NOT FOR BEGINNERS AND REQUIRES VERY EXPERIENCED SOLDERING SKILLS
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
EME227-13CM KIT is a basic Kit that includes the PC board, construction notes, and all on board components. No connectors or enclosure are included. Requires complete construction and soldering of small SMD components.
Please refer to the 13cm ( 2300MHz ) Transverter Block Diagram that will explain in more detail what is required to construct a complete Transverter. For RX only applications, a local oscillator that includes the EME175 KIT2, EME228-2.6G-MLT1 KIT, and suitable crystal is required for this Kit. For a TX/RX application, the EME166 KIT, and EME144 KIT are also required.Basic Kits Do Not include connectors, miscellaneous hardware, enclosure, and require other Kit products etc. This Kit is for very advanced constructors only as it uses a very high number of small SMD components
|Frequency Range: ||2300MHz to 2390MHz |
|Local Oscillator: ||+10dBm, ( 10mW ) 2157MHz ( 147MHz IF ) |
|+10dBm, ( 10mW ) 1869MHz ( 435MHz IF )|
|RX Gain: ||> 24.5dB +/- 2dB |
|RX Noise Figure: ||Typically < 2.8dB ( Typically 2.5dB MGA86563 ) |
|TX IF Drive:||Up to 5 Watts +36dBm @ 147MHz or 435MHz |
|TX RF Output: ||+19dBm ( 80mW ) with 5 Watts +36dBm input @ 147MHz |
|TX Spurious Outputs: ||Refer to the Kits webpage|
|Operating Voltage:||+10 to +15vdc @ 60mA RX Stages, 160mA TX Stages|
|Board Size:||80mm L x 65mm W x 20mm H|
13cm Band 2.3 to 2.4GHz Transverter
- Brand: Mini-Kits
- Product Code: EME227-13CM KIT
- Quantity In stock: 4