The PGA-103-UHF-R2 is a high dynamic range low noise wide-band amplifier that is specifically designed for use between 430MHz and 450MHz. The amplifier is also suitable as a driver amplifier for complex RF waveforms, and produces up to +21dBm output on 400MHz. The amplifier can also be re-tuned for use between 400 and 500MHz. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the PGA-103+ Data Sheet for further information.
This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.
PGA103-UHF-R2-B Is a fully constructed and tested 430-450Mhz PC board Amplifier with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
PGA103-UHF-R2-ENC Is a fully constructed 430-450MHz amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable
|Frequency Range:||430MHz to 450MHz ( Tune-able from 400 to 500MHz ) |
|Band Rejection:||35dB @ 145MHz >60dB @ 900MHz|
|Gain Typically:||22dB +/-1dB @ 435MHz |
|Noise Figure: ||1dB @ 435MHz, ( Typically <0.7dB )|
|OpIP3: ||+39dBm @ 435MHz, with ICC 90mA |
|Output Power: || +21.5dBm @ 435MHz ( +4.5vdc @ 90mA ) |
|Operating Voltage:||+ 7 to 15vdc ( +12vdc @ 90mA Recommended )|
|Board Size:||37mm L x 41mm W x 15mm H ( Does not inc SMA length ) |
|Enclosure Size:||43mm L x 44mm W x 23.3mm H ( Does not inc SMA length ) |
For more information see the PGA103UHF-R2 Product WEBPAGE
PGA-103-UHF Low Noise Amplifier 430-450MHz
- Brand: Mini-Kits
- Product Code: PGA103-UHF-R2
- Quantity In stock: 10