The EME168 Series 2M / 4M / 2M Band RX/TX bias tee Kit is suitable for powering either the Mini-Kits 6M 50MHz band EME220-6M or 2M 144MHz band EME220-2M Pre-amplifiers via the coaxial cable. The design has been optimized to cover the complete 30MHz to 200MHz frequency range for the lowest loss and return loss. The board is fitted with PTC protection to safeguard against any short circuits on the RF/DC output, and over voltage.  Transceivers with an accessory connector usually have a positive voltage, or grounded logic TX output that can be easily connected to the Bias Tee to control the switching. The Bias Tee is designed to handle up to 500 Watts CW.  EME168-VHF Application Block Diagram

Please select the connector types that you require for both the RF connection to the receiver, and the RF/DC connection that goes to the amplifier.

The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.