The Mini-Kits EME205 9MHz BFO Demodulator Kit is part of a building block to construct a high performance M1 Series HF Transceiver.  The module board is designed as a 9MHz I/F SSB and CW demodulator, and uses a SA612 Gilbert Cell Mixer to demodulate the 9MHz I/F down to a filtered audio output. The module includes an on board Beat Frequency Oscillator BFO, that uses switched multiturn trimpots to set the carrier frequencies for CW, LSB and USB. The BFO is also available as an output on the board for connetion to to the M1 Series EME208 SSB modulator which uses the MC1496. The module has been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but is also ideal to construct you own Receiver or Transceiver design.

For more detailed information on how this module Kit can be used, Please refer to the EME205 Kit webpage.

This Kit is ideal for all constructors mainly due to the use of conventional leaded components.  Only a very small number of surface mount components have been used due to component availability.  The basic Kit includes the PC board and all onboard components, but excludes the SMA connectors which can be purchased separately if required.

For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.

EME205 KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. Requires complete construction, and some SMD components fitted.

2 x SMA33 connectors are recommended to use with inter wiring of the module board Kits.

1 x IDC16S connector is recommended to use with inter wiring of the module board Kits.

PC boards are not available separately as this Kit uses a number of specialized components that are not easily obtainable

Kits Do Not include miscellaneous hardware, enclosure, or RF connectors.

Specifications
Input Frequency:
9MHz input 50ohms
Conversion Gain:
18dB +/-0.5dB ( SA612 Data Sheet )
Noise Figure:
5dB @ 45MHz ( SA612 Data Sheet )
Input IP3:
-12dBm ( SA612 Data Sheet )
Audio Output:
400mW p-p @ 1kHz
BFO Output:
-2dBm output maximum @ +12vdc
Operating Voltage: +10 to 15vdc ( +12vdc @ 15mA )
Board Size: 73mm L x 47mm W x 20mm H

M1 Series 9MHz BFO Demodulator

  • Brand: Mini-Kits
  • Product Code: EME205-KIT
  • Quantity In Stock: 30
  • $49.95

  • Export: $45.41

Available Options

Accessories

Enter desired quantity before clicking Add to Cart button

SMA33 PCB Mount Wide 1.6mm

SMA33 PCB Mount Wide 1.6mm

$3.95 Export: $3.59

IDC16S 8x2 DIL 2.54mm

IDC16S 8x2 DIL 2.54mm

$0.66 Export: $0.60

  • Total:

  • Export Total:

Related Products

M1 Series 10dB HF Amplifier

M1 Series 10dB HF Amplifier

Priced from

$29.95 Export: $27.23

M1 Series HF Mixer Amplifier

M1 Series HF Mixer Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz Crystal Filter

M1 Series 9MHz Crystal Filter

Priced from

$44.50 Export: $40.45

M1 Series 9MHz IF AGC Amplifer

M1 Series 9MHz IF AGC Amplifer

Priced from

$74.90 Export: $68.09

M1 Series Transmit Modulator

M1 Series Transmit Modulator

Priced from

$47.50 Export: $43.18

M1 Series 16W HF MosFET Amplifier Rev3

M1 Series 16W HF MosFET Amplifier Rev3

Priced from

$69.95 Export: $63.59

M1 Series HF Attenuator 9MHz Trap

M1 Series HF Attenuator 9MHz Trap

Priced from

$37.95 Export: $34.50

M1 Series 9MHz IF Noise Blanker

M1 Series 9MHz IF Noise Blanker

Priced from

$55.00 Export: $50.00