The 3400MHz multiplier is constructed on a EME171 Universal Microwave board, and has been specifically designed as a local oscillator multiplier for 3400MHz Transverters, RX converters, or as a multiplier for ATV. A Mini-Kits designed 2 section filter is used to effectively filter out harmonics and oscillator noise allowing Transverter I/F frequencies down to 144MHz to be used. Please refer to the Application Block Diagram on how this Kit is used. The tunable pipe cap filter allows the Kit it to be used on frequencies from approximately 2.7 to 4.5GHz.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
THIS KIT IS NOT CURRENTLY AVAILABLE AS WE CANNOT GET THE 7/8" PIPE CAPS
EME3.4G-MLT1 KIT Multiplier Kit is the Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.
EME3.4G-MLT1 PCB Includes Only the PC board and Kit instructions. No on board Components are included.
Kits Do Not include connectors, miscellaneous hardware, or an enclosure. A Metric M5 Tap and 0.9mm drill bit is required to construct this Kit. For advanced constructors Only.
|Frequency Range: ||2700 to 4500MHz ( tunable 7/8" pipe cap filter ) |
|Filter Bandwidth 3256MHz: ||35MHz @ 3dB See Kit Webpage for detailed tests|
|RF Input: ||0 to +3dBm @ 651.2MHz x5, 1120MHz x3 |
|RF Output: ||depends on input frequency & drive level, typically +6 to +8dBm output|
|Operating Voltage:||+10 to 15vdc 78M09 regulator ( +12vdc @ 70mA Recommended )|
|Board Size:||64mm L x 38mm W x 45mm H|
3400MHz Frequency Multiplier
- Brand: Mini-Kits
- Product Code: EME3.4G-MLT KIT
- Availability: Sold Out