The 10GHz multiplier is constructed on a EME171 Universal Microwave board, and has been specifically designed as a local oscillator multiplier for 10GHz Transverters, RX converters, or as a multiplier for ATV.  A pipe-cap cavity filter is used to effectively filter out harmonics and oscillator noise allowing Transverter I/F frequencies down to 144MHz to be used.   Please refer to the Application Block Diagram on how this Kit is used.  The pipe-cap supplied allows the Kit it to be used on frequencies from approximately 8 to 12GHz.

The Product image shows a fully constructed Kit product.  Please refer to the Options Tab for the descriptions of the various products available.

EME10G-MLT1 KIT Multiplier Kit is the Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.

EME10G-MLT1 PCB Includes Only the PC board and Kit instructions. No on board Components are included.

Use the EME5.8G-MLT KIT1 with the EME10G-MLT KIT1 for a complete 10GHz multiplier solution.

Kits Do Not include connectors, miscellaneous hardware, or an enclosure. A Metric M4 Tap and 0.9mm drill bit is required to construct this Kit.  For advanced constructors Only.

Specifications
Input Frequency:
4000 to 6000MHz ( 2x ) 3000 to 4000MHz ( 3x )
Output Frequency:
8000 to 120000MHz ( Tunable 1/2" pipe cap filter )
Filter Bandwidth 9936MHz:
90MHz @ 3dB
RF Input:
-3 to +7dBm ( 0dBm recommended)
RF Output:
depends on input frequency & drive level, typically +10dBm output @ 9936MHz
Operating Voltage: +10 to 15vdc 78M09 regulator ( +12vdc @ 90mA Recommended )
Board Size: 64mm L x 38mm W x 40mm H

EME10G KIT WEBPAGE  ( Sorry there is no page currently available )

Please refer to the Application Block Diagram on how this Kit is used.

10GHz Frequency Multiplier

  • Brand: Mini-Kits
  • Product Code: EME10G-MLT KIT1
  • Quantity In stock: 10
  • $32.50


Available Options


Accessories



Related Products

Complete 23cm FM ATV
5800MHz Frequency Multiplier