The EME168 Series 2M / 70CM Band RX/TX bias tee Kit is suitable for powering either the Mini-Kits 2M band EME220-2M or 70CM Band EME221-70CM Pre-amplifiers via the coaxial cable. The design has been optimized to cover the complete 100MHz to 500MHz frequency range for the lowest loss and return loss. The board is fitted with PTC protection to safeguard against any short circuits on the RF/DC output, and over voltage. Transceivers with an accessory connector usually have a positive voltage, or grounded logic TX output that can be easily connected to the Bias Tee to control the switching. The Bias Tee is designed to handle up to 500 Watts CW. EME221-70CM Application Block DiagramPlease select the connector types that you require for both the RF connection to the receiver, and the RF/DC connection that goes to the amplifier.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: There is a minimum 2 working day delay to construct built products before they are shipped.
EME168-2-70 KIT1 is the complete VHF Kit that includes the PC board, instructions, all on board components, and Hammond 1590A enclosure. Requires complete construction, and soldering of some SMD components.
EME168-2-70 KITB1 Is a fully built and tested product in a Hammond 1590A enclosure.
RF Connector Option ( To Preamplifier ) is the RF connector that connects via a coaxial cable to the Pre-amplifier. This option must be selected and is not optional.
RF Connector Option ( To Transceiver ) is the connector connects via a coaxial cable to the Transceiver. This option must be selected and is not optional.
The RF and RF/DC connectors must be selected when ordering either the
Kit or built product, and are available in BNC, N, and F types.
|Frequency Range: ||100 to 500MHz ( 2M and 70CM bands ) |
|Insertion Loss: ||<0.2dB from 100 to 500MHz |
|Return Loss: ||>50dB from 100 to 500MHz |
|RF Power: ||500 Watts CW |
|Operating Voltage:||+12 to 15vdc ( +15vdc @ 300mA maximum )|
|Product Size:||92mm L x 38mm W x 50mm H|
2M / 70CM RX/TX Bias Tee
- Brand: Mini-Kits
- Product Code: EME168-2-70 KIT
- Quantity In stock: 10