The M1 DDS Controller is a complete logic and DDS controller suitable for Transceiver or Receiver projects, and has been specifically designed to suit the Mini-Kits M1 Transceiver Project.  The Micro-controller uses the M1-DDS software that emulates the functions of the Yaesu FT817 Transceiver, and along with the optional EME187 logic interface board, provides most of the logic functions including receive and transmit power outputs for the various circuitry that is commonly used in a Transceiver.  A mechanical rotary encoder and 4x4 Keypad are used to control most of the functions, and an optional USB to serial adaptor can be used for connection to a computer, which allows Ham Radio Deluxe software to be used to control the functions.

The DDS determines the maximum output frequency that can be produced, not the software, and the software supports the 10 bit AD9850/51 or 12 bit AD9954 DDS chips.  This controller Kit Does Not include the DDS.  For more information on what the software and hardware can do, please see the M1-DDS Controller Webpage

Please click this Link to see what is included in the Basic M1-DDS Kit

M1-DDS KIT1 is a Basic Kit that includes the EME188 LCD interface KIT, EME189 Encoder KIT, EME190 PIC Controller Kit, EME188 LCD Interface Kit, 1x Metre Ribbon Cable, Pre-programmed with the M1-DDS Software.  Requires complete construction, and soldering of some SMD components.

M1-DDS KIT2 is a Basic Kit that includes the EME198 LCD interface KIT, EME189 Encoder KIT, EME190 PIC Controller Kit, EME198 LCD Interface Kit, 1x Metre Ribbon Cable, Pre-programmed with the M1-DDS Software.  Requires complete construction, and soldering of some SMD components.

EME187 KIT M1 Logic Interface KIT to suit expansion of the EME190 controller to provide all logic output functions for the M1 Transceiver. 
Requires complete construction, and soldering of some SMD components.

The LCD Module, Keypad, Control Knob, EME187 Logic Interface Kit, FT232RL, Optical Encoder, and DDS Kits are all optional and not included with the basic M1-DDS KIT. The difference between the M1-DDS KIT 1 and KIT2 is the LCD Interface Kit. Select KIT2 for use with the Large character LCD6 module, and KIT1 for standard pin out modules.

Specifications
Frequency Range: 5kHz to ( 70MHz AD9851 ) ( 175MHz AD9954 )
Freq Resolution: 10Hz both Display and RF output
Freq Steps: 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz, 10MHz, 100MHz
Display Offset: To suit zero I/F, or up to 145MHz for the first I/F offset
Display Divider: Zero IF, Divide by 2, Divide by 4
VFO: A / B, split, RIT, Repeater
Bands: 160M, 80M, 40M, 30M, 20M, 17M, 15M, 12M, 10M, 6M, FM, AIR, 2M, 70CM, Phantom
Modes: AM, FM, DIG, PKT, LSB, USB, CW, CWR
Outputs: Band Data, Modes, Filter selection, RF Power, AGC, IPO, ATT, NB, Proc, Vox, TX Enable
Inputs: PTT, S Meter
Software: M1-DDS verX.X2 firmware ( Updatable via USB )
Interface: Optional USB FT232RL to serial Adapator
Operating Voltage: +12vdc @ 140mA includes LCD backlight
Board Size: See the specific Kits for all the board sizes
Kit Webpage:
www.minikits.com.au/m1-dds-control.htm

For more information see the M1-DDS-Controller KIT WEBPAGE

Please refer to the M1-DDS Controller Kit Construction Notes for the wiring block.

M1-DDS Controller Kit

  • Brand: Mini-Kits
  • Product Code: M1-DDS-KIT
  • Quantity In stock: 10
  • $70.00


Available Options


Accessories



Related Products

Basic AD9851 DDS VFO
Basic AD9851 I/Q DDS
Basic AD9954 DDS VFO
EME187 Logic Interface
EME186 PC board
Basic AD9951 DDS VFO