GALI-74 Driver Amp +18dBm HF-4GHz

The GALI-74 driver amplifier is a simple wideband high +21db Gain amplifier for use between 500kHz and 2GHz. The amplifier is ideal as a transmitter driver, and has > +18dBm output power @ 1dB compression over the HF to 2GHz range. Only around -6dBm 0.25mW is required to drive the amplifier to full power. The basic Kit includes PC board and all on board components, including components to optimize the design to suit 2 frequency ranges from 500kHz to 2GHz. Please refer to the GALI-74+ Data Sheet for further information. A 78M08 regulator is mounted under the board for +9 to 15vdc operation.

The Product image shows a fully constructed GALI-74 KIT product with optional SMA connectors. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: This Product is only available as a Kit.

GALI-74 KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction, and soldering of SMD components.

GALI-74 PCB Only includes the PC board and Kit construction notes.

Basic Kits Do Not include connectors, miscellaneous hardware, or enclosure. The 2.1mm DC cable is optional and not supplied with Products. Ideal for beginner to average constructor.

Please Note: We no longer have the time to construct this Kit and offer it as a built product.

Specifications
Frequency Range:	0.5 to 850MHz, 50MHz to 2GHz versions available
Gain Typically:	22.6dB @ 500kHz, 23dB @ 1MHz, 25dB @ 50MHz, 24dB @ 500MHz, 21dB @ 1.2GHz, 17dB @ 2.4GHz
Noise Figure:	Typically < 3dB across the frequency range
OpIP3:	+36.75dBm @ 1GHz with ICC 800mA
Output Power:	+19.4dBm @ 50MHz, +19.5dBm @ 1GHz, +19.4dBm @ 2GHz
Operating Voltage:	+ 9 to 15vdc ( +12vdc @ 80mA Recommended )
Board Size:	45mm L x 32mm W x 15mm H