The 5800MHz filter amplifier has been specifically designed to be used with the EME5.8G-MLT Multipier KIT1 to provide extra filtering and amplification of the 5800MHz signal. The amplifier has 10dB gain and uses a pipe-cap cavity filter to effectively filter out of band signals, and uses a Gali-39 amplifier to produce up to +10dBm output. The 3/4" pipe-cap supplied has a tune-able frequency range of approximately 3.7 to 6GHz. Please refer to the Application Block Diagram on how this Kit is used.
For use with a Transverter, it is highly recommended that both the EME5.8G-MLT KIT1 and EME5.8G-AMP KIT1 are purchased to provide the required filtering of the Local Oscillator signal. For basic receive only, you could use the EME5.8G-MLT KIT1 followed by a Gali-39 Amplifier.
The Product image shows a fully constructed Kit product with an optional module. Please refer to the Options Tab for the descriptions of the various products available.
EME5.8G-AMP1 KIT is A Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.
EME5.8G-AMP1 PCB Only includes the PC board and Kit instructions. No on board Components are included.
Constructed products are not currently available.
Kits Do Not include connectors, miscellaneous hardware, or an enclosure. A Metric M4 Tap and 0.9mm drill bit is required to construct this Kit. For advanced constructors Only.
|Frequency Range:||3700MHz to 6000MHz |
|Gain Typically:||10dB @ 5616MHz |
|Bandwidth:||70MHz @ 3dB 5616MHz |
|Input Power: ||-3 minimum to +7dBm maximum |
|Output Power: ||+10dBm @ 1dB compression for 0dBm input |
|Operating Voltage:||+ 7 to 12vdc ( +12vdc @ 35mA Recommended )|
|Board Size:||64mm L x 38mm W x 35mm H|
5800MHz Driver Amp +10dBm
- Brand: Mini-Kits
- Product Code: EME5.8G-AMP KIT1
- Quantity In stock: 4