The complete 2350 to 2450MHz Transverter is suitable for for both Satellite operation on 2401MHz, and SSB on 2403MHz, and is constructed on a professionally etched 90x65mm Teflon PC Board. The receive converter uses a low noise MGA86563 PHEMT, 5 Section Hairpin Filter, Mini-Circuits ADE-35 mixer, and IF amplifier with the option to use either a 144 or 432MHz IF. The transmit converter uses the same mixer and filter which are switched by pin diodes, and a two section transmit driver amplifier to produce up to +19dBm output. This Transverter cannot be used or modified for use below 2350MHz due to the fixed hairpin filter design.
The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
This Product has been Sold Out so it Not available
is a basic Kit with a 144MHz IF that includes the PC board, construction notes, and all
on board components. No connectors or enclosure are included. Requires complete construction and soldering of small SMD components.
EME94 KIT2 is a basic Kit with a 432MHz IF that includes the PC board, construction notes, and all on board components. No connectors or enclosure are included. Requires complete construction and soldering of small SMD components.
For 2400 to 144MHz select the 94MHz crystal, and for 2400 to 432MHz use the 82MHz crystal.
Please refer to the 13cm ( 2400MHz ) Transverter Block Diagram that will explain in more detail what is required to construct a complete Transverter. For RX only applications, a local oscillator that includes the EME175 KIT1, EME2256-MLT KIT, and suitable crystal is required for this Kit. For a TX/RX application, the EME166 KIT, and EME144 KIT are also required. A 7809T regulator can be used with the EME166 sequencer kit to supply +9vdc for the Transverter.Basic Kits Do Not include connectors, miscellaneous hardware, enclosure, and require other Kit products etc. For advanced constructors due to the small SMD components, and metal work that is required.
|Frequency Range: ||2350MHz to 2450MHz |
|Local Oscillator: ||+7dBm, ( 5mW ) 2256MHz ( 144MHz IF ) |
|+7dBm, ( 5mW ) 1968MHz ( 432MHz IF )|
|RX Gain: ||> 23dB |
|RX Noise Figure: ||Typically < 2.6dB ( MGA86563 ) |
|TX IF Drive:||-10dBm ( 0.1mW ) @ 144MHz |
|TX RF Output: ||+19dBm ( 80mW ) with -10dBm input @ 144MHz |
|TX Spurious Outputs: ||Refer to the EME94 Kit Webpage|
|Operating Voltage:||+9vdc @ 80mA RX Stages, +9vdc @ 120mA TX Stages|
|Board Size:||82mm L x 65mm W x 20mm H|
- Brand: Mini-Kits
- Product Code: EME94 KIT
- Availability: Discontinued Product
Tags: 13cm transverter